Roccat Kave XTD 5.1 Analog Vs. Razer BlackShark V2 X
|
![Kave XTD 5.1 Analog](content/product/2015/04/908/thumb-Roccat-Kave-Xtd-5.1-Analog-3289.jpg) |
![BlackShark V2 X](content/product/2022/03/2076/thumb-BlackShark-V2-X-01.jpg) |
|
Kave XTD 5.1 Analog
| BlackShark V2 X
|
Specification: | | |
Software: | | |
Weight (grams): | 335g | 240g |
Channels: | 5.1 | 7.1. Surround Sound (Only available on Windows 10 64-bit) |
Connection: | | Analog 3.5 mm jack |
Cable Length: | 3m | 1.3 m |
Wireless: | | No |
Battery: | | No |
Lighting: | | |
Colour Options: | | None |
Lighting Effect: | | None |
Driver: | | |
Size: | 40mm Neodymium magnet | 50 mm Razer TriForce |
Type: | | |
Impedance: | 32Ohms | 32 ? (1 kHz) |
Frequency Response: | 20 - 20,000Hz | 12 Hz - 28 kHz |
Max. input power: | 50 mW | |
Sensitivity at 1KHz: | 115 +/- 3dB | |
Microphone: | | |
Directivity: | omni-directional | Cardioid Mic - Unidirectional |
Impedance: | 2.2kOhms + 15% | |
Sensitivity at 1KHz: | -32 +/- -2dB | -42 dB V/Pa, 1 kHz |
Frequency Response: | 10 - 10,000Hz | 100 Hz – 10 kHz |
Signal-to-Noise Ratio: | 50dB | |
Capsule Size: | | |
Detachable: | | |
| Also compared to: | Also compared to: |
Kave XTD 5.1 Analog
The Kave XTD 5.1 Analog by Roccat is a 5.1 channel gaming headset, which uses a 40mm Neodymium magnet driver. It uses a connection with a 3m cable. This delivers a frequency response of 20 - 20,000Hz and a sensitivity of 115 +/- 3dB. It also has a omni-directional microphone with a frequency response of 10 - 10,000Hz and a sensitivity of -32 +/- -2dB. And only weighs in at 335g.
BlackShark V2 X
The BlackShark V2 X by Razer is a 7.1. Surround Sound (Only available on Windows 10 64-bit) channel gaming headset, which uses a 50 mm Razer TriForce driver. It uses a Analog 3.5 mm jack connection with a 1.3 m cable. This delivers a frequency response of 12 Hz - 28 kHz. It also has a Cardioid Mic - Unidirectional microphone with a frequency response of 100 Hz - 10 kHz and a sensitivity of -42 dB V/Pa, 1 kHz. And only weighs in at 240g.