Roccat Kave XTD 5.1 Analog Vs. Razer Kraken V3
|
|
|
|
Kave XTD 5.1 Analog
| Kraken V3
|
Specification: | | |
Software: | | |
Weight (grams): | 335g | 325 g / 0.71 lbs |
Channels: | 5.1 | |
Connection: | | USB-A |
Cable Length: | 3m | 1.3 m / 4.27 ft |
Wireless: | | No |
Battery: | | No |
Lighting: | | |
Colour Options: | | Razer Chroma RGB |
Lighting Effect: | | |
Driver: | | |
Size: | 40mm Neodymium magnet | 50 mm Titanium |
Type: | | |
Impedance: | 32Ohms | 32 Ohm (1 kHz) |
Frequency Response: | 20 - 20,000Hz | 20 Hz - 20 kHz |
Max. input power: | 50 mW | |
Sensitivity at 1KHz: | 115 +/- 3dB | 96 dBSPL / mW @ 1 KHz (HATS) |
Microphone: | | |
Directivity: | omni-directional | Unidirectional Cardioid - Detachable |
Impedance: | 2.2kOhms + 15% | |
Sensitivity at 1KHz: | -32 +/- -2dB | -42 +/- 3 dB |
Frequency Response: | 10 - 10,000Hz | 100 Hz - 10 kHz |
Signal-to-Noise Ratio: | 50dB | |
Capsule Size: | | |
Detachable: | | |
| Also compared to: | Also compared to: |
Kave XTD 5.1 Analog
The Kave XTD 5.1 Analog by Roccat is a 5.1 channel gaming headset, which uses a 40mm Neodymium magnet driver. It uses a connection with a 3m cable. This delivers a frequency response of 20 - 20,000Hz and a sensitivity of 115 +/- 3dB. It also has a omni-directional microphone with a frequency response of 10 - 10,000Hz and a sensitivity of -32 +/- -2dB. And only weighs in at 335g.
Kraken V3
The Kraken V3 by Razer, which uses a 50 mm Titanium driver. It uses a USB-A connection with a 1.3 m / 4.27 ft cable. This delivers a frequency response of 20 Hz - 20 kHz and a sensitivity of 96 dBSPL / mW @ 1 KHz (HATS). It also has a Unidirectional Cardioid - Detachable microphone with a frequency response of 100 Hz - 10 kHz and a sensitivity of -42 +/- 3 dB. And only weighs in at 325 g / 0.71 lbs.